iENYRID ES1 2400W Dual Motor Electric Scooter

The iENYRID ES1 is a folding high-performance electric scooter built around an aluminium-alloy frame and 10-inch off-road pneumatic tyres. Its substantial chassis is designed for private-land leisure and mixed-surface riding, while the folding frame and three-level adjustable handlebar make storage and transport more practical. An optional seat configuration is also available depending on the selected product variant.

Power comes from two independent 1200W brushless hub motors, providing a combined motor output of 2400W. The scooter can be switched between single-motor and dual-motor operation, allowing the rider to choose between lower electrical demand and full dual-drive performance. Maximum published speed is 37 mph, while a central colour LCD dashboard provides riding information and password-protected access.

The ES1 uses a 48V 20.8Ah lithium battery with a maximum published range of approximately 37 miles per charge. Charging is handled by a 54.6V 2A charger, with a stated charging time of approximately six to eight hours. The larger battery capacity supports the scooter’s dual-motor system while providing practical distance for longer private-land journeys.

Actual range varies according to rider weight, use of single or dual motors, speed, acceleration, gradients, tyre pressure, surface conditions, temperature, wind and stopping frequency. Continuous high-speed riding and frequent dual-motor acceleration increase battery demand, while lower speeds and single-motor use can reduce consumption. The 37-mile figure therefore represents the maximum published range rather than a fixed distance for every ride.

The ES1 uses 10-inch off-road pneumatic tyres together with a dual swingarm spring suspension system. The manufacturer describes the system as using four independent suspension arms to help absorb impacts and vibration over uneven surfaces. Combined with the wider pneumatic tyres, the suspension configuration gives the ES1 a chassis suited to gravel, compact trails and other appropriate private-land terrain.

Braking is handled by front and rear mechanical disc brakes supported by an electronic brake. Equipment includes a colour LCD display with password unlock, front headlight, turn signals, side lighting and a rear brake light. Published scooter weight is approximately 66.1 lb and maximum load is approximately 331 lb. The manufacturer also states an IP54 design but advises against riding the scooter in rain or water.

With its dual 1200W motors, 2400W combined output, 48V 20.8Ah battery, 37 mph maximum speed and approximately 37-mile maximum published range, the iENYRID ES1 is a high-performance electric scooter intended for suitable private-land use. Privately owned electric scooters cannot currently be ridden legally on UK public roads, pavements, cycle lanes or other public spaces and should only be used on private land with the landowner’s permission.