iENYRID A1 Folding Electric Scooter

The iENYRID A1 is a folding electric scooter built around an aluminium-alloy frame and 10-inch all-terrain pneumatic tyres. Its quick-fold construction is designed to make storage and transport easier, while the wide standing deck and compact folding format provide a practical configuration for private-property riding, leisure use and transportation between permitted riding locations.

Power comes from an 800W brushless hub motor controlled through a finger throttle. The manufacturer publishes a maximum speed of 28 mph and also confirms that the scooter includes cruise-control functionality. A circular colour LCD display provides access to speed, battery status and riding information while the throttle gives direct control over motor acceleration.

The A1 uses a 48V 12.5Ah lithium battery with a maximum published range of approximately 20 miles per charge. Charging is handled by a 54.6V 2A charger, with a stated charging time of approximately six to eight hours. The battery and motor combination is designed around shorter and medium-distance recreational or private-land journeys rather than extended long-range riding.

Actual range varies according to rider weight, speed, acceleration, gradients, surface conditions, tyre pressure, temperature, wind and stopping frequency. Riding continuously at higher speeds or on steeper terrain increases battery demand, while lower speeds and smoother surfaces can reduce energy consumption. The published 20-mile figure should therefore be treated as a maximum manufacturer range rather than a fixed distance for every journey.

The A1 combines 10-inch pneumatic tyres with independent front and rear spring suspension. This dual-suspension configuration helps absorb vibration and impacts from uneven surfaces, while the pneumatic tyres provide additional cushioning and surface contact. The manufacturer also specifies an aluminium-alloy folding frame and a maximum climbing figure of 20 degrees in its comparison data.

Braking is handled by front and rear mechanical disc brakes supported by an electronic brake. Equipment includes a front headlight, turn signals, side lighting strips, rear brake light, finger throttle and circular colour LCD display. The scooter weighs approximately 44.3 lb, supports a maximum load of approximately 265 lb and carries a manufacturer-stated IPX4 splash-resistance rating.

With its 800W motor, 48V 12.5Ah battery, 28 mph maximum speed and approximately 20-mile published range, the iENYRID A1 combines folding portability with dual suspension, 10-inch pneumatic tyres and multiple braking systems. In the UK, privately owned electric scooters are restricted to use on private land with the landowner’s permission and should not be used on public roads, pavements, cycle lanes or other public spaces.